Purchase of Medical Equipment

• Country: Azerbaijan
• Summary: Purchase of Medical Equipment
• AZT Ref No: 131111395
• Deadline: 29 Dec 2025
• Financier: Self Financed
• Purchaser Ownership: Government
• Tender Value: AZN 1706300.00
• Notice Type: Tender
• Document Ref. No.: 2025/AT/00756/V1
• Purchaser's Detail:
  Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details.

  Login to see details
• Description:
• Angiography, General requirements: 1. The device must be factory-made, new and unused; 2. Monoplane system - providing imaging from only one side (in one plane). should be done; 3. The equipment must have a CE certificate. System composition and technical indicators: 1. X-ray generator: It should be a high-frequency generator, with a minimum power of 80 kW should be, kVp range should be 40-125 Kv, mA range should be 10 - 1250 mA, Automatic dose adjustment (AEC) should be, Pulsed and fluoroscopic modes should be, User-defined must have 10+ anatomical programs that can be programmed; 2. X-ray tube: It should have a rotating anode, heat resistance min 1 MHU must be, Focal points must be minimum 2 (0.6 mm and 1.0 mm ), Anode speed must be 10000 rpm or higher, Heat dissipation system (with oil-cooling or air circulation); 3. Digital detector (Flat Panel Detector): Digital flat panel (a-si or CMOS), Size should be 35x35 cm or larger, Pixel size should be maximum 200 µm, Matrix min. Must be 2000 x 2000 pixels, Must have at least 2.5 lp/mm resolution and 30 fps real video stream; 4. C-arm and Mechanics: Must be C-arm with motorized control, C-arm movements horizontal movement ±20 cm vertical ±40 cm rotation angle should be ±135º Fully automated iso-centric rotation, simple and should be capable of manual control in emergency situations. Imaging and processing functions: 1. Must have DSA (Digital Subtraction Angiography); 2. There should be Road Map (road map mode); 3. Must have Cine Loop (continuous playback of recorded video); 4. Substraction and Must have mask modes; 5. Digital measurement tools: distance, area, angle and flow rate; 6. There should be interactive window width and level adjustment; 7. Real-time image capture and processing should be possible. Operator Console and Monitors: 1. Touch screen must be the main control panel; 2. There should be at least 2 medical-grade 21" - 24" monitors (resolution min. Full HD); 3. One of the monitors is on the doctor's table,...
• Documents:

 Tender Notice