Purchase of Instrumental Analysis Laboratory Goods Tender

• Country: Azerbaijan
• Summary: Purchase of Instrumental Analysis Laboratory Goods for Turkey Azerbaijan University
• AZT Ref No: 134478976
• Deadline: 25 Feb 2026
• Financier: Self Financed
• Purchaser Ownership: Government
• Tender Value: AZN 1648781.78
• Notice Type: Tender
• Document Ref. No.: 2026/AT/00242/V1
• Purchaser's Detail:
  Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details.

  Login to see details
• Description:
• HPLC, LIQUID CHROMATOGRAPH 1. 1 4-line degasser gradient pump 2. 1 autosampler 3. 1 DAD / PDA 4. 1 column holder 5. Software 6. 1-year replacement parts and service warranty. Moldovans mentioned above all must be from the same manufacturer. All parts of the system must be modular. It provides the ability to integrate additional modules if needed. The device must be set up by a certified specialist and trained. IQ, OQ tests should be done during installation and relevant protocols are not provided. PUMP • The pump must be integrated with a 4-channel degassing unit. • The working pressure should be at least 800 bar, and the pressure difference should be at least 5 bar. • Pump flow accuracy should be ≤0.07% RSD • Standard the lag volume in the configuration should not exceed ≤ 350 µL. • The flow rate should be adjustable between 0.001 - 5 ml/min. • There should be a 4-way valve with the possibility of selecting a solution. Autosampler • The injection volume should be at least 0.1 to 100 µl. For this volume necessary accessories should be provided • Can work with at least 800 bar. • The system must have a minimum sample capacity of 130 for at least 2 ml vials. If necessary, it should be possible to increase it to 400 vials in the future • Loop is automatically washed should know. • Injection volume accuracy should be 0.15% RSD. • Cary over value should not exceed max 0.003% (0.0009% with Multiwashing). • Must have a cooling function. • All functions must be controlled by computer. Detector 1 • DAD/PDA • 1024 should be deuterium and tungsten lamps with diodes • Signal acquisition speed should be 120 HZ • Can work in the wavelength range of 190-950 nm. • Linear absorbance should be 2 AU' at 265 nm. • Drift better than 0.9*10-3 AU/h at 254 nm should be • There should be a data storage function according to GLP protocols. • Slit width should be 6.5 nm • The bandwidth should be between 1-400 nm. • Detector face...
• Documents:

 Tender Notice