Online Purchase of Turbidity and Residual Chlorine Measuring Tender

• Country: Azerbaijan
• Summary: Online Purchase of Turbidity and Residual Chlorine Measuring Devices
• AZT Ref No: 132109507
• Deadline: 12 Jan 2026
• Financier: Self Financed
• Purchaser Ownership: Government
• Tender Value: AZN 689168.97
• Notice Type: Tender
• Document Ref. No.: 2025/AT/00928/V1
• Purchaser's Detail:
  Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details.

  Login to see details
• Description:
• Device/On-Line/,On-line Turbidity device • The device should consist of interconnected transmitter and sensor (analyzer) parts; • The turbidity measurement range of the device should be 0.000 - 200.0 NTU or 0.000 - 1000.0 NTU; • During turbidity measurement of the device the error (or accuracy of measurement) shall not exceed 0.003 FNU (or NTU) or at most 1% of the measurement value; • Capable of measuring when 20 - 60 liters / hour or 1.6 - 25.0 ml / hour of water passes through the body of the device where the sensor is located. should be; • The diameter of the inlet water line to the body of the device where the sensor is located should be at least 10 mm (to prevent clogging with suspended substances and to ensure constant water flow); • 220 V or 24 V power supply for the device must be optional; • The device should have measurement capabilities in free and non-pressurized water flow and in addition, it should be equipped with a pressure regulator on the inlet line (to transfer it to free flow if there is pressure in the sample line); • Device sensor the body of the located part should have the feature of easy cleaning, it should be equipped with a flow channel (with valve) for easy evacuation of the water inside the flow chamber; • The body of the sensor part of the device must be made of PETP material; • During the turbidity determination of the device, there should be no requirement to use additional chemical additives in the measurement work; • Regular additional spare part for cleaning of biological sediments and suspended substances in the water flow chamber of the sensor part of the device the required electro-mechanical (or fully mechanical) equipment part should not be installed; • In the part of the device where the sensor is located, an additional spare part is regularly required for the cleaning of biological sediments on the part performing the measurement work. a mechanical (or fully mechanical) piece of equipment must not be installed; • In order t...
• Documents:

 Tender Notice